Quality Products, Superior Service, Competitive Prices
Government  |  B2B  |  Education  |  Libraries  |  Subscribe  |  Blog

Cisco Aironet PoE Injector 120 V AC 230 V AC Input 55 V DC 2 A Output

Cisco Aironet PoE Injector 120 V AC 230 V AC Input 55 V DC 2 A Output
  • Item #:
  • Category:
  • Availability:
  • Packaging:
  • Platform:
  • Condition:
  • Brand:

For School/Academic or Government pricing, call 440.355.8008



REQUEST A QUOTE


x
First Name:
Last Name:
Phone Number:

ex: 999-999-9999


Email:
Preferred Contact Method:

Call Me Back
Email Back
Call or Email

Preferred Return Call Window:


Comments:
Product ID:
Title:

1-800-755-4619
ONLINE (9am-6pm ET)
OFFLINE (9am-6pm ET)
Product Rating

0 star(s) (0 Ratings) Write a Review


General Information

The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal, and sending both to the connected access point.

The power injector combines 55-VDC power (supplied by internal power supply) with the data signal, sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded, outdoor rated Ethernet cable.

The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG.

The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter.

A shielded, outdoor Ethernet cable connects the power injector to a 10/100/1000 Ethernet switch, hub, or network, and another shielded, outdoor cable carries power and data to the access point's Ethernet port. The power injector's AC power receptacle connects an approved AC power cord to a wall outlet or power strip. The power injector can be mounted on most horizontal and vertical surfaces, but must be mounted in a vertical orientation to comply with safety requirements.

Technical Information
Protection Type:Surge Protection

Power Description
Input Voltage:230 V AC
Input Voltage:120 V AC
Maximum Output Voltage:55 V DC
Maximum Output Current:2 A
Maximum Output Power:60 W

Interfaces/Ports
Input Ports:1 x Ethernet
Output Ports:1 x Ethernet

Physical Characteristics
Mount Type:Pole/Wall-mountable
Height:2.8"
Width:5.9"
Length:8.4"
Weight (Approximate):2.98 lb

Miscellaneous
Compatibility:Cisco Aironet 1560 Series Outdoor Access Points
Certifications & Standards:
  • CE
  • IEEE 802.3af
  • IEEE 802.3at
  • FCC Part 15, Class B
  • CE, EN50522 Class B
  • EN55024
  • VCCI
  • EN61000-4-5 Class 5 (6kV CM)
  • UL60950-1
  • UL60950-22
  • GS
    • Environmentally Friendly:Yes
    Country of Origin:Philippines

    WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
    Be the first to review this product. Write a Review
    Shipping Restrictions
    • This item cannot be shipped to PO Boxes.
    • This item can be shipped only within the U.S.


    • UPC: 882658905322 
    • Mfr's Part #: AIR-PWRINJ-60RGD1=