The PDUMNV30LX 2.9kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for IT and industrial applications, the vertical PDU features 24 NEMA 5-15/20R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L5-30P plug connects the PDU to a compatible AC power source, generator or protected UPS.
The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
A digital ammeter allows you to monitor power consumption for both breakered load banks, as well as the total load to ensure they remain well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access. Features
Distributes and Monitors Network-Grade AC Power
2.9kW 120V 20A monitored PDU with single-phase input
NEMA L5-30P with 10 ft. cord connects to compatible AC power source
Firmware upgrades support future product enhancements
24 NEMA 5-15/20R Outlets Distribute Power
Cord retention brackets prevent cables from becoming accidentally disconnected
Digital Ammeter
Reports power consumption for both breakered load banks, plus total output current
Supports IP-address self-ID
Rotates 180° for easy reading at either angle
Built-In LX Platform Interface
Allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH
Supports 10/100 Mbps auto-sensing for communication with an Ethernet network
Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities
Supports automatic and manual assignment of IP address
Easy 0U Installation in EIA-Standard 19 in. Racks
Mounts vertically using included toolless buttons or rack-mounting brackets
Included PDUMVROTATEBRKT allows mounting with rear-facing outlets
TAA-Compliant
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Technical Information
PDU Type:
Monitored
Design:
Modular
Phase:
Single Phase
Plug/Connector Type:
NEMA L5-30P
Receptacle Type:
NEMA 5-15/20R
Receptacle Detail:
24 x NEMA 5-15/20R
Protection Type:
Overload Protection
Power Description
Input Voltage:
120 V AC
Output Voltage:
120 V AC
Power Rating (Watt):
2880 W
Input Current:
30 A
Management
Management:
IPv4
IPv6
HTTP
HTTPS
SMTP
SNMPv1
SNMPv2
SNMPv3
telnet
SSH
FTP
DHCP
NTP
Remote Outlet Switching:
Yes
Interfaces/Ports
Network (RJ-45):
Yes
Physical Characteristics
Mounting Orientation:
Vertical
Mount Type:
Rack-mountable
Rack Height:
0U
Height:
70"
Width:
2.2"
Depth:
1.8"
Weight (Approximate):
11.50 lb
Miscellaneous
Package Contents:
PDUMNV30LX 2.9kW Single-Phase Monitored PDU
Built-in LX Platform Interface
Configuration Cable
24 x Cable ties
2 x Cord retention brackets
Rack-mounting hardware
PDUMVROTATEBRKT Mounting Bracket Accessory
Owner's Manual
Environmentally Friendly:
Yes
Country of Origin:
Taiwan
TAA Compliant:
Yes
Warranty
Limited Warranty:
2 Year
WARNING:
This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.