Quality Products, Superior Service, Competitive Prices
Government  |  B2B  |  Education  |  Libraries  |  Subscribe  |  Blog

Black Box 10/100/1000B-T PoE PSE To 1000B-X Media Converter LPS500AMMLCR3

Black Box 10/100/1000B-T PoE PSE To 1000B-X Media Converter LPS500AMMLCR3
  • Item #:
  • Category:
  • Availability:
  • Packaging:
  • Platform:
  • Condition:
  • Brand:

For School/Academic or Government pricing, call 440.355.8008


Your Price: $318.78
Qty:
Product Rating

0 star(s) (0 Ratings) Write a Review


General Information
  • Copper port auto negotiates for network speed and features Auto MDI-X for easy cabling.
  • LEDs indicate when it is feeding PoE power as well as when power is interrupted.

RoHS compliant. Connect Gigabit-speed fiber optic to a 10-/100-/1000-Mbps copper UTP segment while also powering 802.3af devices at the end of the CAT5 run. This PoE PSE Gigabit Media Converter from Black Box enables you to transparently connect copper cabling to multimode fiber as an economical way to extend Ethernet communications well beyond the 100-meter (327-foot) CATx limit.

Along with matching copper to interference-free fiber at Gigabit speeds, the converter doubles as power sourcing equipment (PSE) for Power over Ethernet (PoE) devices plugged in on the copper side. Using existing UTP cabling for both data communications and 48-VDC power simplifies a network application in terms of provisioning power and maintaining equipment.

It's particularly ideal for locating equipment where electrical access is inconvenient or just too expensive to locate. Install PoE-compatible security cameras and wireless access points in areas without any nearby power outlets while reducing your overall power consumption, too. Plus, the PoE PSE Gigabit Media Converter has extensive power management features, including overcurrent protection, undercurrent detection, minimum load sensing, and PSE MDI power enable/disable.

For reliable data communications, the media converter boasts link fault pass-through (LFP) capabilities, monitoring receive ports on both the fiber and copper sides for loss of signal. If signaling is lost on one media port, it automatically disables the transmit (TX) signal to the other media port.

Additionally, a far-end fault (FEF) function enables the converter to cease sending a link pulse to a link partner if signaling on the fiber receive (RX) port is lost. The link partner will also synchronously stop sending data. This way, you don't lose valuable data transmitted over an invalid link.

This product is covered by one or more of the following: United States Patent Nos. 7,457,250; 8,902,760; and/or 9,019,838.

Interfaces/Ports
Total Number of Ports:2
Network (RJ-45):Yes
Number of PoE (RJ-45) Ports:1
PoE Port Type:PSE
Number of LC Ports:1
LC Port Type:Duplex

Media & Performance
Media Type Supported:Twisted Pair
Media Type Supported:Optical Fiber
Fiber Mode Supported:Multi-mode
Fiber Optic Wavelength:850 nm
Maximum Distance Supported:1804.46 ft

Network & Communication
Ethernet Technology:Gigabit Ethernet
Network Technology:10/100/1000Base-T
Network Technology:1000Base-SX

Power Description
Power Source:AC
Power Consumption:65 W
Frequency:50 Hz
Frequency:60 Hz

Physical Characteristics
Form Factor:Wall Mountable
Height:1.6"
Width:6.2"
Depth:5.2"
Weight (Approximate):1.30 lb

Miscellaneous
Application/Usage:Network
Environmentally Friendly:Yes
Country of Origin:Taiwan

Warranty
Limited Warranty:2 Year

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Be the first to review this product. Write a Review
Shipping Restrictions
  • This item cannot be shipped to PO Boxes.
  • This item can be shipped only within the U.S.


  • UPC: 822088150589 
  • Mfr's Part #: LPS500A-MM-LC-R3