6kVA/5.4kW/208V Battery Backup for IT Installations and Edge Networks
This 9PX rack-mount online double-conversion UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable IT equipment or destroy data. The 9PX6K is superlative power management for education, commercial, financial or healthcare networking components, including Cisco switches and servers.
Expandable Internal Battery Backup Keeps You Operational Through Power Outages
The field-replaceable, hot-swappable valve regulated lead acid (VRLA) battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Exclusive ABM technology increases battery life by 50 percent and closely monitors battery health to provide advanced notice when batteries need replacing. You can also connect up to four extended battery modules (9PXEBM180RT, sold separately) for hours of extended runtime.
Included Gigabit Network Interface Offers 24/7 Remote Access
The NETWORK-M2 Gigabit network card enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don't have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. The optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions.
NEMA Outlets Protect Your Connected Components
Two L6-20R and two L6-30R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. The 9PX6K also supports hardwired output.
More from the Manufacturer
Technical Information
Plug/Connector Type:
NEMA L6-30P
Receptacle Type:
NEMA L6-20R
Receptacle Type:
NEMA L6-30R
Receptacle Type:
Hardwired
Receptacle Detail:
1 x NEMA L6-20R
Receptacle Detail:
2 x NEMA L6-30R
Transfer Time:
0 ns
Overload Protection:
Yes
Power Description
Load Capacity (VA):
6000 VA
Input Voltage:
110 V AC
Input Voltage:
220 V AC
Output Voltage:
200 V AC
Output Voltage:
208 V AC
Output Voltage:
220 V AC
Output Voltage:
230 V AC
Output Voltage:
240 V AC
Input Frequency:
70 Hz
Output Frequency:
60 Hz
Management
Network Management:
SNMP Manageable
Bypass Switch:
Optional
Emergency Power OFF:
Yes
Interfaces/Ports
Serial Port:
Yes
Network (RJ-45):
Yes
USB:
Yes
Battery Information
Battery Characteristics:
Maintenance-free/Sealed
Battery Chemistry:
Lead Acid
Backup/Run Time (Full Load):
3 Minute
Backup/Run Time (Half Load):
8 Minute
Physical Characteristics
Form Factor:
Rack/Tower
Rack Height:
3U
Height:
5.1"
Width:
17"
Depth:
28"
Weight (Approximate):
105.82 lb
Miscellaneous
Package Contents:
9PX6K 6kVA Tower/Rack Mountable UPS
Network-MS Web/SNMP Card
4-Post Rail Kit
User Manual
Quick Start Guide
Tower Pedestals
Intelligent Power Software Suite CD
RS-232 Serial Cable
USB Cable
Cable Gland for Hardwire Conection
Phillips Head Screw Driver
Software Included:
Eaton Intelligent Power Software
Environmentally Friendly:
Yes
Environmental Certification:
RoHS
Country of Origin:
Philippines
Warranty
Limited Warranty:
3 Year
WARNING:
This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.