Tripp Lite series B110-SPPOEC-J12 In-Line PoE++ Surge Protector
- Item #:
- Category:
- Availability:
- Packaging:
- Platform:
- Condition:
- Brand:
For Government/Education/Business pricing, please call 440.355.8008
Features | 2U In-Line Surge Protector Keeps Your PoE Equipment Safe Ideal for home/corporate IP security/building cameras, wireless access points, network switches and other appropriate network/PoE devices, the B110-SPPOEC-J12 protects connected Power over Ethernet (PoE) equipment from damage caused by electrostatic discharge (ESD) and power surges. Just connect it between your source, such as an Ethernet switch, and up to 12 PoE devices using Cat5e/6 cables. The 2U rack panel streamlines circuit protector placement for your entire system, typically located in the rear of a 19-inch rack for input/output lines. Your Last Defense Against Intruding Voltage Spikes Solid-state silicon-avalanche diode technology features low clamping voltage, providing superior protection against ESD and super-fast response time under one nanosecond. Both mid-span and end-span PoE are supported. The B110-SPPOEC-J12 meets the following IEC/EN regulations: IEC 61000-4-2 for ESD (8k/15kV), IEC 61000-4-4 for EFT (2kV, 5KHz/100KHz) and IEC 61000-4-5 for lightning (2KA 8/20µs, 6KV 8/20µs). Ready to Use Right from the Package, So You Can Plug and Play Immediately This PoE++ in-line surge protector meets 802.3af, 802.3at and 802.3bt Type 4 IEEE standards, while supporting data transmission speeds up to 10 Gbps. No software or external power supply is required. The compact metal housing is designed to endure in applications where static discharge is likely to occur. Mounting hardware is included for convenient rack installation in 2U of space. TAA-Compliant for GSA Schedule Purchases The B110-SPPOEC-J12 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. |
| Plug/Connector Type: | RJ-45 |
| Receptacles: | 24 x RJ-45 |
| Dataline Protection: | PoE |
| Dataline Protection: | Network |
| Dataline Protection: | Ethernet |
| Dataline Protection: | PoE++ |
| Dataline Protection: | RJ-45 |
| Supported Ethernet Speed: | 1.25 GB |
| Features: | Plug & Play |
| Maximum Surge Current: | 2 kA |
| Minimum Operating Temperature: | 32°F (0°C) |
| Maximum Operating Temperature: | 104°F (40°C) |
| Minimum Storage Temperature: | 5°F (-15°C) |
| Maximum Storage Temperature: | 122°F (50°C) |
| Color Family: | Black |
| Product Color: | Black |
| Product Material: | Zinc |
| Product Material: | Metal |
| Product Material: | SECC |
| Form Factor: | Rack-mountable |
| Rack Height: | 2U |
| Height: | 3.5" |
| Width: | 19" |
| Depth: | 0.9" |
| Weight (Approximate): | 2.54 lb |
| Package Contents: | - B110-SPPOEC-J12 In-Line PoE++ Surge Protector
- Grounding Wire, 1 ft. (0.3 m)
- Grounding Wire Screw
- 4 x Rack-mounting Screws
- Installation instructions
|
| Application/Usage: | A/V Equipment |
| Application/Usage: | Camera |
| Application/Usage: | Wireless Access Point |
| Application/Usage: | Network Switch |
| Certifications & Standards: | - IEC 61000
- CE (Europe)
- IEEE 802.3af PoE
- IEEE 802.3at PoE+
- UKCA
|
| TAA Compliant: | Yes |
| Environmental Compliance: | Restriction of Hazardous Substances (RoHS) |
| Environmental Compliance: | Waste Electrical and Electronic Equipment Directive (WEEE) |
 | WARNING:
This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov. |
Shipping Restrictions
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
- UPC:
037332295217
- Mfr's Part #:
B110-SPPOEC-J12