![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
Tripp Lite SmartPro 2.2kVA 1.92kW Line-Interactive Sine Wave UPS, Network Card
General Information
| Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and slot for optional Network Management Card. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules. |
Technical Information
| Plug/Connector Type: | NEMA 5-20P |
| Receptacles: | 4 x NEMA 5-15R |
| Receptacles: | 4 x NEMA 5-20R |
| Protection Type: | Over Voltage |
| Protection Type: | Under Voltage |
| Emergency Power OFF: | Yes |
| Cord Length: | 10 ft |
| Transfer Time: | 4 ms |
Power Description
| Load Capacity: | 2200 VA/1920 W |
| Input Voltage: | 120 V AC |
| Output Voltage: | 120 V AC |
| Output Voltage: | 110 V AC |
| Waveform Type: | Sine Wave |
Management
| Network Management: | SNMP Manageable |
| Alarm: | On Battery |
| Alarm: | Overload |
| Alarm: | Low Battery |
Controls/Indicators
| Status Indicators: | 5 Front Panel Leds:
|
Interfaces/Ports
| Serial Port: | Yes |
| USB: | Yes |
Battery Information
| Backup/Run Time (Full Load): | 4.50 Minute |
| Backup/Run Time (Half Load): | 12 Minute |
| Typical Battery Recharge Time: | 4.50 Hour |
| Hot Swappable: | Yes |
Environmental Conditions
| Maximum Operating Temperature: | 104°F (40°C) |
Physical Characteristics
| Height: | 3.5" |
| Width: | 17.5" |
| Depth: | 19" |
| Rack Height: | 2U |
| Weight (Approximate): | 64 lb |
Miscellaneous
| Package Contents: |
|
| Certifications & Standards: |
|
| Recycled: | No |
| Environmentally Friendly: | Yes |
| Environmental Certification: | RoHS |
| Country of Origin: | China |
Warranty
| Limited Warranty: | 3 Year |
![]() | WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. |
Be the first to review this product. Write a Review
Shipping Restrictions
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
- UPC: 037332118059
- Mfr's Part #: SMART2200RMXL2U



















(0 Ratings) 