Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks
Audible alarm signals loss of utility power, low battery or overload
8 NEMA 5-15R outlets
6 ft. power cord with 120V NEMA 5-15P input
690-joule surge suppression rating
Reliable Battery Backup
Supports half load up to 19 min. and full load up to 7 min.
Internal batteries designed for hot-swap field replacement
95% line-power efficiency rating saves money in energy costs
Cold-start capability enables turn-on in battery mode during blackouts
Automatic Voltage Regulation (AVR)
Maintains selectable 100V, 110V or 120V nominal output over input range of 83V-145V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
LED Indicators
Front-panel LEDs signal indicate line power, battery power, overload, voltage regulation and battery status
Network Management Cards
Compatible with Tripp Lite UPS management card options WEBCARDLX, SNMPWEBCARD and RELAYIOCARD
Communication Ports
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert
Telephone/Network Jacks
Protect against power surges over telephone/DSL or network Ethernet lines
Technical Information
Plug/Connector Type:
NEMA 5-15P
Receptacle Type:
NEMA 5-15R
Receptacle Detail:
8 x NEMA 5-15R
Cord Length:
6 ft
Power Description
Load Capacity (VA):
1050 VA
Load Capacity (Watt):
650 W
Input Voltage:
100 V AC
Input Voltage:
110 V AC
Input Voltage:
120 V AC
Output Voltage:
100 V AC
Output Voltage:
110 V AC
Output Voltage:
120 V AC
Waveform Type:
Sine Wave
Management
Network Management:
SNMP Manageable
Alarm:
On Battery
Alarm:
Overload
Controls/Indicators
Status Indicators:
Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator.
Interfaces/Ports
USB:
Yes
Total Number of Expansion Slots:
1
Battery Information
Battery Chemistry:
Lead Acid
Backup/Run Time (Full Load):
7 Minute
Backup/Run Time (Half Load):
19 Minute
Battery Life:
6 Year
Typical Battery Recharge Time:
4 Hour
Hot Swappable:
Yes
Environmental Conditions
Maximum Operating Temperature:
104°F (40°C)
Physical Characteristics
Height:
10.2"
Width:
6.8"
Depth:
13.2"
Form Factor:
Tower
Weight (Approximate):
43 lb
Miscellaneous
Package Contents:
SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS
SMART1050SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
1050VA / 650 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
Large internal batteries offer runtimes of 19 minutes at half load (525VA / 325 watts) and 7 minutes at full load (1050VA / 650 watts)
Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91-145V
Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface
Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
15 LEDs offer continuous detailed status information of UPS operating parameters and site power quality
Hot-swappable batteries allow on-site battery replacement without powering off connected equipment
UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Emissions) Listed
2 year warranty with up to $250,000 connected equipment insurance
WARNING:
This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
This item ships directly from the manufacturer and is not stocked in our warehouse. If stock is available at the manufacturer, the item will ship directly to you, usually within 7 - 15 business days.
Once the order has been sent to the manufacturer it can no longer be canceled.
If payment is made via credit card it will be charged before the order is sent to the manufacturer.
You must contact the manufacturer directly regarding returns and defective items.
We will contact you by email if the item is sold out or backordered (and we were unable to update the site before you placed the order) or if the item will be delayed longer than expected.
We have no control over the speed of the manufacturer's order processing, or whether they will honor your request to ship the item by any particular method.