Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks
Audible alarm signals loss of utility power, overload, low battery and fault conditions
6 C13 outlets
C14 inlet accepts user-supplied AC power cord with country-specific plug
350-joule surge suppression rating
Reliable Battery Backup
Supports half load up to 11.9 min. and full load up to 3.6 min.
Internal batteries designed for hot-swap field replacement
97% line-power efficiency rating saves money in energy costs
2 Load Banks with Switchable Outlets
Can control 4 outlets remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
Maintains 230V nominal output over input range of 182V-278V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
Interactive LCD Screen
Front-panel LCD signals voltage, battery and load statuses
Supports multiple advanced user setup and operating preferences
Rotates for easy viewing in rack-mount or tower configurations
Optional Network Management Cards
Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
Optional WEBCARDLX (sold separately) with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities
PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations
IP-based Auto Probe detects lost connectivity and restores service autonomously
Communications Ports
USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's Power Alert software (available via free download at <li">www.tripplite.com/poweralert)
<li">EPO port supports emergency shutdown in large facilities
Versatile Installation Options
Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
Mounts in upright tower position with optional 2-9USTAND accessory
Technical Information
Plug/Connector Type:
IEC 320-C14
Receptacle Type:
IEC 60320 C13
Receptacle Detail:
6 x IEC 60320 C13
Emergency Power OFF:
Yes
Transfer Time:
4 ms
Power Description
Load Capacity (VA):
1000 VA
Load Capacity (Watt):
900 W
Input Voltage:
220 V AC
Output Voltage:
230 V AC
Management
Network Management:
SNMP Manageable
Interfaces/Ports
Serial Port:
Yes
USB:
Yes
Battery Information
Backup/Run Time (Full Load):
3.60 Minute
Backup/Run Time (Half Load):
11.90 Minute
Typical Battery Recharge Time:
4 Hour
Hot Swappable:
Yes
Physical Characteristics
Height:
3.5"
Width:
17.5"
Depth:
13.5"
Rack Height:
2U
Form Factor:
Rack/Tower
Weight (Approximate):
33.40 lb
Miscellaneous
Package Contents:
SmartPro SMX1000RT2U Rackmountable/Tower UPS
UPS System with 4 post rackmount hardware
Two 1.8m IEC320-C13 to C14 load jumper cables
Cabling for USB & DB9 monitoring and EPO switching
PowerAlert unattended shutdown and UPS/Power monitoring software
Warranty information
Additional Information:
Replacement Battery Cartridge quantity: 2
Cooling method: Fan
Compatible with Tripp Lite's Watchdog system service
Cold Start Capable
Certifications & Standards:
CE
UL1778
EN62040
GOST
SASO
IRAM
Software Included:
PowerAlert monitoring software
Country of Origin:
China
Warranty
Limited Warranty:
2 Year
WARNING:
This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
This item ships directly from the manufacturer and is not stocked in our warehouse. If stock is available at the manufacturer, the item will ship directly to you, usually within 7 - 15 business days.
Once the order has been sent to the manufacturer it can no longer be canceled.
If payment is made via credit card it will be charged before the order is sent to the manufacturer.
You must contact the manufacturer directly regarding returns and defective items.
We will contact you by email if the item is sold out or backordered (and we were unable to update the site before you placed the order) or if the item will be delayed longer than expected.
We have no control over the speed of the manufacturer's order processing, or whether they will honor your request to ship the item by any particular method.